Additional information
- Weight: 7 lbs
- Dimensions: 8 × 8 × 8 in
-
Volume:
0.9 L
-
Type:
Wood Stain
-
Use:
Touching up Ignite products
$39.00
Teknos Woodex stain is the perfect match for touching up your Thermory Ignite product.
Before application: Remove all loose matter, dirt, or dust.
Application: Stir thoroughly before use. Tinted product must also be stirred during the application, if needed. Reserve a sufficient amount of wood stain in the same vessel for each uniform surface, to avoid color differences. The wood stain is applied evenly and continuously on the whole length of the beam or timber to avoid making restart points. Treat end grain with special care. Brush application is recommended for the first coat.
Application Conditions: The surface to be treated must be dry. The moisture content of the wood is to be below 20%. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +41°F (+5°C) and the relative air humidity below 80%. Avoid application in direct sunlight.
Storage: Must not freeze.
Downloads: Safety Datasheet
0.9 L
Wood Stain
Touching up Ignite products
0.9 L
Wood Stain
Touching up Ignite products
©2023 Thermory USA, All Rights Reserved.
Privacy Policy | Terms & Conditions of Use | Accessibility Statement
This website is produced and supported by FARM.